OPERATING PROCEDURE
(4) Slide the motor (A) with motor base (D) in direction of allow
1 . (Fig. 5)
Model 54
*Motor maintenance procedure is almost 30 model
procedure.
Model 54 has twin shaft motor. After removing the fan
and fan case which are in front of motor,remove the motor.
(1) Remove the bell mouse of the front fan motor with procedure
model 30.
(2) Loosen the setting screws of the front fan , removed the fan.
(3) Remove the front fan case.
(4) Operate with procedure model 30.
Notice: Fixing screws of the fan case are shown Fig. 7.
Remove the fixing screws (H) , fan case can be removed.
Fig.7
19
Be careful on removing heavy parts.
PHOTOS
Fig.5
(A)
Fig.6
Motor (A)
Fan case
Fan case fixing screws (H)
(D)
Arrow 1