Panasonic S-26PU1U6 Operating Instructions Manual page 20

Split system air conditioner
Hide thumbs Also See for S-26PU1U6:
Table of Contents

Advertisement

163011_SingleSplit_EN_2.fm Page 20 Thursday, September 15, 2011 9:03 AM
Setting Current Time
After changing the batteries and pressing reset, be sure to reset the current time.
(When reset is pressed, the current time reverts to [
1. Press
for two seconds or more.
Once the clock displays starts blinking, the clock can be set.
2. Set the hour with
/
If you press and hold the button, the time changes quickly.
3. Set the minutes with
If you press and hold the button, the time changes quickly.
4. Pressing
completes the time setting.
While you are setting the current time, the t ime display flashes but the colon does not.
If the buttons are not pressed for three minutes while setting the current time, it is set to the
displayed time.
NOTE
When reset is pressed, the timer settings are deleted.
Operation
Auto
, Heat
, Dry
, Cool
Models that only provide the cooling function cannot operate in the auto or heating modes.
Power: Turn on the power of the indoor unit at least 14 hours before operation.
1. Press
.
2. Press
and select from among Auto
3. Press
and select the desired speed.
If set to Auto
, the fan speed switches automatically.
(Auto does not work when in the Fan mode.)
4. Press one of the
Temperature settings cannot be made when in the Fan mode.
Auto
MAX
MIN
Stop: Press
.
When the unit is stopped with the remote controller, even though the compressor of the
outdoor unit stops, the fan on the outdoor unit may continue to run for a while.
If the unit is not heating very effectively with a Low fan speed
Depending on the indoor unit being used, it may indicate a function that it does not have. (The fan speed is set.)
If you cannot turn the air conditioner off in the normal way.
Disconnect the power to the indoor unit and contact the dealer where the product was purchased.
20
OPERATION
])
of the
.
/
of the
.
, Fan
, Heat
, Dry
buttons and set the desired temperature.
Heat
Dry
80
78
62
60
, Cool
and Fan
.
/ Cool
86
64
, switch the fan speed to High
1, 4
2
3
1
3
4
2
or
Medium.

Advertisement

Table of Contents
loading

Table of Contents