163011_SingleSplit_EN_2.fm Page 13 Tuesday, September 27, 2011 4:23 PM
UNIT DISPLAY AND OPERATION CONTROLLER FOR K1, U1, AND T1 TYPES
OPERATION lamp
OPERATION lamp
TIMER lamp
STANDBY lamp
Remote control receiver
Operation controller
(housed inside)
OPERATION
TIMER lamp
lamp
TIMER lamp
This lamp lights when the appliance is turned on.
This lamp lights when the system is being controlled by the timer.
When the unit is in the heating standby condition, the STANDBY lamp lights. If the unit is used for
cooling only, the STANDBY lamp will not illuminate. This lamp operates only when an alarm occurs.
This section picks up infrared signals from the wireless remote controller (transmitter).
You can operate this air conditioner using the operation controller without the wireless remote
controller.
Remote control
receiver
STANDBY lamp
Remote control
receiver
STAND BY lamp
13