Panasonic S-26PU1U6 Operating Instructions Manual page 17

163011_SingleSplit_EN_2.fm Page 17 Thursday, September 15, 2011 9:03 AM
How to Use Wireless
Remote Controller
Wireless Remote
Controller Installation
Position
USING WIRELESS REMOTE CONTROLLER (CONTINUED)
When using the wireless remote controller, always point the unit's transmitter head directly at
the air conditioner's receiver.
Air conditioner
(Transmitter head)
Wireless remote controller
The wireless remote controller can be operated from either a non-fixed position or a wall-
mounted position. To ensure that the air conditioner operates correctly, do not install the
wireless remote controller in the following places:
• In direct sunlight
• Behind a curtain or other place where it is covered
• More than 19 ft away from the air conditioner
• In the path of the air conditioner's air stream
• Where it may become extremely hot or cold
• Where it may be subject to electrical or magnetic interference
1. If Non-fixed Position
Raise the rear plate of the remote controller mounting cradle and insert the wireless remote
controller.
The unit can be used either in that position (placed on a table, for instance) or held in the
hand.
Wireless Remote
Controller
Remote Controller
mounting cradle
2. If Wall-mounted Fixed Position
Install the wireless remote controller at a convenient location on a nearby wall. However,
before attaching the wireless remote controller mounting cradle, check that the wireless
remote controller can operate from the desired wall position.
Fasten the Remote Controller
mounting cradle with screws.
Remote Controller mounting cradle
Remote control receiver
Rear plate
Fitting the Remote
Controller in the mount.
2
Press
1
Put in
17