Operating Your Power Chair - Golden Technologies GP162 Owner's Manual

LiteRider PTC_GP162_Owner's Manual
Maximum Speed/Profile Indicator Flashes
This indicates the speed of the wheelchair is being limited for safety reasons. Contact
your Golden Technologies representative
The VR-2 modules are not user serviceable. Do not attempt to repair VR-2
modules.
FREEWHEEL MODE
♦ To disengage the brakes and put your power chair in freewheel mode, push the
freewheel levers down. See figure 16.
♦ To re-engage the brakes and take your chair out of freewheel mode, pull the freewheel
levers up. See figure 16.
or incline of any type.

operating your power chair.

27
VII. OPERATION
Drive
Freewheel
Never put your power chair in freewheel mode when it is on a slope
Never put your power chair in freewheel mode while you are
Figure 16
Rev C_022114