Seat Installation - Golden Technologies GP162 Owner's Manual

LiteRider PTC_GP162_Owner's Manual Rev C_022114
IV. ASSEMBLY

Seat Installation

1. Fold the seat back down
.
2. Grasp the seat firmly on each side, lift the seat and align the seat pin with the hole in the
seat post receiver. See figure 4.
Figure 4
3. Insert the seat into the seat post.
4. Push down on the seat to lock into place. Move the seat from side to side to make sure it
is locked into place.
To rotate your seat, push down on the seat rotation lever and rotate the seat
to the desired position. Release the handle to lock the seat in position.
Be sure the seat is correctly installed and locked before operating
your power chair.
Never pull on the arms or use them as a handle to move the power
chair as they could inadvertently pull out of the receiver bar causing injury.
13