Joystick Position - Golden Technologies GP162 Owner's Manual

LiteRider PTC_GP162_Owner's Manual
Joystick Bracket Length Adjustment
1. Loosen the adjustment knob. See figure 13.
2. Slide the joystick holder in or out to the desired position.
3. Tighten the adjustment knob.

Joystick Position

1. Loosen the joystick adjustment screw.
2. Slide the joystick mount forward and remove the joystick.
3. Reposition the joystick and joystick cable to the opposite side of the power chair.
4. Flip up the armrest.
5. Remove the two bolts connecting the joystick bracket to the armrest. See figure 14.
Joystick
Adjustment Screw
6. Place the joystick bracket on the opposite armrest; align the two bolts with the two holes
in the armrest, and tighten to secure the bracket to the armrest.
7. Insert the joystick mount into the joystick bracket and adjust to a comfortable position.
8. Tighten the joystick adjustment screw to secure the joystick.
Note: If you do not feel capable of safely making these adjustments, please contact your
local Golden representative.
VI. COMFORT SETTINGS
Figure 13
Figure 14
Joystick Bracket Bolts (2)
(5mm Allen)
Rev C_022114
20