Golden Technologies GP162 Owner's Manual page 16

LiteRider PTC_GP162_Owner's Manual Rev C_022114
IV. ASSEMBLY
Joystick Installation
1. Loosen the joystick bracket adjustment screw located under the armrest. See figure 6.
2. Insert the joystick mounting tube into the joystick bracket under the armrest.
3. Adjust the position of the joystick to a comfortable spot.
4. Tighten the joystick adjustment screw to secure the joystick.
Figure 6
Note: The joystick may be installed on the left or right arm according to your preference.
15