Travis Industries 520-96 Owner's Manual page 47

REPLACEMENT PARTS AND REMOVAL INSTRUCTIONS
(Continued)
Removing and Replacing the Firebricks (Continued)
REPLACING THE BAFFLE (TOP) FIREBRICKS & COMPONENTS (Continued)
5. Slide two more firebricks into the rear of the appliance. They will fit very snug, so some effort may be
required. The firebricks will not lie flat until the "T" Bar is placed into position.
6. Slide the "T"
Bar into
position,
making sure it
goes under the
back firebricks.
7. Place the "Y"
Bar into
position, but
rotate it so that
it looks like the
drawing on the
previous page:
"Y Bar after
Rotation".
8. Slide the
forward
firebricks into
position. The
smaller
firebrick
should be in
the middle.
9. Rotate the "Y"
Bar so that it
looks like the
drawing on the
previous page:
"Y Bar before
Rotation".
EXPLODED VIEW OF BAFFLE (TOP) FIREBRICK
Damper Rod
Clips where
"Y" Bar rests
REMOVAL
Damper
Rear Baffle Angle
("T" Bar)
Secondary Air Tubes
Page 47
Damper
Plate
Firebricks
Front Bafle Angle
("Y" Bar)
Air Induction System
(Welded to the sidewalls
of the appliance)
Clips where
"T" Bar rests