For Macintosh Users - Epson Stylus Color 880 Setup Manual

For Macintosh users

Macintosh users must first install the printer software, and then select the
printer in the Chooser.
?
Caution:
Turn off all virus protection programs before installing the printer software.
Installing the software
Follow the steps below to install the printer software.
1. Turn on your Macintosh and insert the software CD in the CD-ROM
drive. The contents of the EPSON printer software CD are displayed.
2. If a single Installer icon is displayed, double-click the icon. If separate
folders containing installer icons for several languages are displayed,
double-click the folder for your preferred language, then double-click
the Installer icon inside it.
Note:
It is possible to install the Reference Guide on your hard drive from the printer
software CD-ROM. To install the guide, click Install Reference Guide and
follow the on-screen instructions. When the installation is complete, a View
Reference Guide icon appears in the EPSON folder. Double-click the icon
to open the guide.
3. In the initial dialog box, click
Continue. The Installer dialog box
opens.
4. Make sure that the Install Location
box displays the correct drive to
install to, then click Install.
5. When a message appears informing
you that the installation is
complete, click Restart to restart
your computer.
Selecting your printer in the Chooser
After you have installed the printer software on your Macintosh, you must
open the Chooser and select your printer. You need to select a printer the
first time you use it or whenever you want to switch to another printer. Your
Macintosh will always print using the last printer selected.