Macintosh Users - Epson Stylus Color 980 Manual

2. Plug the cable connector
securely into the printer's
interface connector, then
squeeze the wire clips
together until they lock into
place on both sides. If your
cable has a ground wire,
connect it to the ground
connector below the
interface connector.
3. Plug the other end of the cable into the computer's parallel
interface. If there is a ground wire at the computer end of the
cable, connect it to the ground connector at the back of the
computer.
Using the USB interface for Windows and

Macintosh users

To connect the printer to a USB
port, you need a standard,
shielded USB cable. Follow the
steps below.
1. Make sure that both the
printer and the computer
are turned off.
2. Plug the appropriate end of
the cable into the USB port at the back of the printer. (The
shape of the end that fits the printer differs from that of the
end that fits the computer.)
3. Connect the other end of the cable to the computer's USB port.
9