Resetting To Default Values - Monarch 9906 Operator's Handbook Manual

R e s e t t i n g t o D e f a u l t V a l u e s
Use this setting to reset the printer's communication values to the defaults listed at the
beginning of this chapter.
To access this setting, from the Main Menu select Setup, Serial Comm. Then, follow
these steps.
1. Press  or  until you see Reset.
SERIAL COMM
← Reset
No
ENTER
2. Press CHANGE to highlight the reset options.
SERIAL COMM
Reset
← No
ENTER CANCEL
3. Press  or  to scroll through the reset options.
4. When you see the reset option you need, press ENTER. Press CANCEL to leave the
reset option unchanged.
Selecting "Yes," resets the baud, parity, word length, and stop bit to factory
Note:
default.
If you chose yes, to reset the values, press ENTER to verify.
SERIAL COMM
Are you sure?
← Yes
ENTER
5. Press BACK until you return to the Home/Online screen.
SERIAL COMM
← Reset
No
ENTER
→
BACK
→
→
BACK
→
BACK
Setting Communications 5-7