Samsung VP-D903D Owner's Instruction Book page 106

ENGLISH
Troubleshooting
✤ If these instructions do not solve your problem, contact your nearest
Samsung authorized service centre.
Symptom
You cannot switch the Check the battery pack or the AC Power Adapter.
camcorder on.
START/STOP button Check the POWER switch is set to CAMERA.
does not operate while You have reached the end of the cassette.
recording. Check the record protection tab on the cassette.
The camcorder goes off You have left the camcorder set to STBY for more than 5
automatically. minutes without using it.
The battery pack is fully exhausted.
The battery pack is The atmospheric temperature is too low.
quickly exhausted. The battery pack has not been charged fully.
The battery pack is completely dead, and cannot be
recharged, Use another battery pack.
When you see a blue The video heads may be dirty.
screen during playback. Clean the head with a cleaning tape.
A vertical strip appears The contrast between the subject and the background is too
on the screen when great for the camcorder to operate normally. Make the
recording a dark background bright to reduce the contrast or use the BLC
background. function while you are recording brighter.
The image in the The Viewfinder lens has not been adjusted.
viewfinder is blurred. Adjust the viewfinder control lever until the indicators
displayed on the viewfinder come into sharp focus.
Auto focus does not Check the M.FOCUS menu.
work. Auto focus does not work in the Manual Focus mode.
Play, FF or REW button Check the POWER switch. Set the power switch to PLAYER.
does not work. You have reached the beginning or end of the cassette.
When you see a broken
This is normal operation and it is not a failure or defect.
block image during the
RECORD SEARCH.
106 106
Explanation/Solution
✤
START/STOP
/
5
POWER
PLAYER
RECORD SEARCH
/
CAMERA
BLC