Demonstration - Samsung VP-D903D Owner's Instruction Book

ENGLISH
Advanced Recording
G

DEMONSTRATION

✤ Demonstration automatically shows you the major functions that are
included with your camcorder so that you may use them more easily.
✤ The DEMONSTRATION function may only be used in the
CAMERA mode without a tape inserted in the camcorder.
✤ The demonstration operates repeatedly until the DEMONSTRATION
mode is switched OFF.
1. Set the camcorder to CAMERA mode.
2. Press the MENU button.
I
The menu list will appear.
3. Move the MENU SELECTOR to highlight INITIAL
and push the MENU SELECTOR.
4. Select DEMONSTRATION from the submenu and
push the MENU SELECTOR.
5. To activate the DEMONSTRATION, set
DEMONSTRATION ON.
I
Press the MENU button to quit the menu.
I
The demonstration will begin.
6. To end the DEMONSTRATION, set the
DEMONSTRATION to OFF.
Notes
I
The DEMONSTRATION function only works
without a TAPE installed.
I
The DEMONSTRATION mode is automatically activated when the
camcorder is left idle for more than 10 minutes after switching to the
CAMERA mode (no tape is inserted in the camcorder).
I
If you press other buttons (FADE, BLC, PHOTO, EASY Q) during the
DEMONSTRATION mode, the DEMONSTRATION stops temporarily
and resumes 10 minutes later if you do not operate any other functions.
42 42
G
DEMONSTRATION
✤
✤ DEMONSTRATION
✤
1.
2.
CAM MODE
INITIAL CLOCK SET
CAMERA WL. REMOTE
3.
A/V
BEEP SOUND
MEMORY
SHUT. SOUND
VIEWER
LANGUAGE
DEMO
4.
5.
CAM MODE
INITIAL SET
CLOCK SET
WL.REMOTE
BEEP SOUND
SHUTTER SOUND 6.
LANGUAGE ENGLISH
DEMONSTRATION
I
I
I
DEMONSTRATION
FADE
EASY Q
DEMONSTRATION
DEMONSTRATION
OFF
CAMERA
MENU
I
MENU SELECTOR
INITIAL MENU SELECTOR
DEMONSTRATION
MENU SELECTOR
DEMONSTRATION
DEMONSTRATION
ON
I
MENU
I
DEMONSTRATION
DEMONSTRATION
OFF
DEMONSTRATION
CAMERA
10 DEMONSTRATION
BLC PHOTO
DEMONSTRATION
10
CAMERA