Adjusting The Lcd During Play; Play; Controlling Sound From The Speaker - Samsung VP-D903D Owner's Instruction Book

ENGLISH
Basic Recording

Adjusting the LCD during PLAY

✤ You can adjust the LCD during playback.
✤ The adjustment method is the same procedure as used in CAMERA
mode. (see page 32)

Controlling Sound from the Speaker

The Speaker works in PLAYER mode only.
I
When you use the LCD screen for playback, you can hear recorded sound
from the built-in Speaker.
- Follow the instructions below to decrease or mute
speaker volume in the PLAYER mode.
1. Set the power switch to PLAYER mode.
2. Press (PLAY/STILL) to play the tape.
3. When you hear sounds once the tape is in play,
use the MENU SELECTOR to adjust the volume.
I
A volume level display will appear on the LCD.
Levels may be adjusted from anywhere between
00 to 19.
I
If you close the LCD while playing,
you will not hear sound from the speaker.
Notes
I
When the cable is connected to the AUDIO/VIDEO
jack, you cannot hear sound from the speaker and
cannot adjust the volume.
I
If a cable is connected to the AUDIO/VIDEO jack,
you can hear sound from the speaker when
AV IN/OUT MODE on MENU is set to AV IN.
(VP-D903i/D903Di only)
I
You can hear sound from speaker by removing the
connected cable from the AUDIO/VIDEO
(or S-VIDEO) jack.

PLAY

✤
✤
PLAYER
I
2
3-1
<3-2>
0 : 2 3 : 4 7
5 5 min
VOL. [ 1 1 ]
1 0 : 0 0
10 . J A N . 2 0 0 4
CAMERA
- PLAYER
1. PLAYER
2. (PLAY/STILL)
3.
SELECTOR
I
00 19
I
I
A/V
I
MENU
/
VP-D903i/D903Di
I
A/V S-VIDEO
32
Speaker
/
MENU
AV IN/OUT MODE
AV IN
A/V
35 35