Table of Contents
Advertisement
DXE Beep Codes
# of Beeps
Description
1
Invalid password
4
Some of the Architectural Protocols are not available.
5
No Console Output Devices are found.
5
No Console Input Devices are found.
6
Flash update is failed.
7
Reset protocol is not available.
8
Platform PCI resource requirements cannot be met.
ACPI/ASL Checkpoints
Status Code
Description
0x01
System is entering S1 sleep state.
0x02
System is entering S2 sleep state.
0x03
System is entering S3 sleep state.
0x04
System is entering S4 sleep state.
0x05
System is entering S5 sleep state.
0x10
System is waking up from the S1 sleep state.
0x20
System is waking up from the S2 sleep state.
0x30
System is waking up from the S3 sleep state.
0x40
System is waking up from the S4 sleep state.
0xAC
System has transitioned into ACPI mode. Interrupt controller is in APIC mode.
0xAA
System has transitioned into ACPI mode. Interrupt controller is in APIC mode.
106
http://www.tyan.com
Advertisement
Table of Contents
