Using The Memory Function - Omron BP710N Instruction Manual

Using the Memory Function

The monitor automatically stores the results up to 14 sets.
Note: If the memory is full, the monitor will delete the oldest value.
To View the Measurement Values Stored in Memory
1.
Press the
The Memory number appears for a second
before the pulse rate is displayed. 
The newest set is numbered "1".
2.
Press the
memory.
To Delete All the Values Stored in Memory
1.
Press the
2.
While holding the
down, press the START/STOP
button for more than 3 seconds.
Note: You cannot partially delete the values stored in the memory.
USING THE DEVICE
button.
button repeatedly to view the values stored in
button, while the memory symbol appears.
button
17