Connecting External Devices - TYAN S7066 Instructions Manual

2.11 Connecting External Devices

Connecting external devices to the motherboard is an easy task. The motherboard
supports a number of different interfaces through connecting peripherals. See the
following diagrams for the details.
LAN3 (Intel 82574, shared with IPMI AST2300)
+ 2 USB2.0 Ports
NOTE:
1. When i350 LAN chip is
2. Peripheral devices can be plugged straight into any of these ports but software
may be required to complete the installation.
Onboard LAN LED Color Definition
The three onboard Ethernet ports have green and yellow LEDs to indicate LAN
status. The chart below illustrates the different LED states.
No Link
10 Mbps
100 Mbps
1000 Mbps
VGA
COM
on, LAN1 and LAN2 can support 10Mbps~1Gbps.
10/100/1000 Mbps LAN Link/Activity LED Scheme
Link
Active
Link
Active
Link
Active
http://www.tyan.com
ID LED Button
LAN1
Left LED
(Link/Activity)
OFF
Green
Blinking Green
Green
Blinking Green
Green
Blinking Green
42
LAN2
Right LED
(Speed)
OFF
OFF
OFF
Solid Green
Solid Green
Solid Yellow
Solid Yellow