Advertisement
When using Mac OS X®
Check USB ports
Checking wheel operation
Check the USB port on your computer.
Check that the vertical scrolling functions are working correctly
in Safari.
Click the Safari icon in the Dock.
USB port
Safari will launch.
y
Any USB port may be used.
This product can be connected to a USB hub. However, it
y
may not work depending on the power supply capability
Display your favourite web site in Safari and change the
of the USB hub.
size of the window so that the vertical scrollbars appear.
* The sample website used here is the ELECOM homepage.
Installing the Receiver Unit
Activate the Macintosh.
y
Wait until Mac OS X has started up completely.
Insert the receiver unit into a USB port on your Macintosh.
Insert here.
Scroll the wheel back and forth.
USB port
Receiver unit
y
Carefully check the orientation of the connector
The mouse is operating normally if the screen
and the place where you will connect the
moves up and down as you scroll the wheel.
receiver unit.
If you feel strong resistance when inserting
y
In applications that do not support scrolling, the screen
the receiver unit, check that the shape and
will not move when you scroll the wheel.
orientation of the connector is correct. Using
excessive force may damage the connector and
cause injury.
The mouse driver is installed automatically.
Troubleshooting
When the product appears to be
malfunctioning
When the mouse pointer on the screen does not
„
move, or moves unstably, when the mouse is moved
It is possible that the reflectivity of the surface on which this
product is being used is not suitable for an optical mouse.
Use this product on a mouse pad that is designed for use with
optical mice.
When using this product on a metallic surface such as a steel
If Safari is not in the Dock, double-click
desk, radio wave outreach may be shortened. In such cases,
the Safari icon in the Applications folder.
move the receiver unit closer to the mouse until mouse
operation stabilises.
It is possible that the receiver unit is not connected correctly to
the USB port. Disconnect the receiver unit from the USB port and
reconnect it.
Scrollbar
The receiver unit and the mouse body are too far apart or there
is a possibility that the receiver unit is facing in a direction from
which it cannot receive radio signals. Adjust the position of the
receiver unit.
The operable range of this
product is the area within a
circle with a radius of 10 m
from the receiver unit.
Depending on the usage
environment, the mouse may
not operate even when it is
within approximately 10 m of the
receiver unit. In such cases, move
the mouse closer to the receiver unit until operation stabilises.
Interference may occur if multiple units of this product are used
together or if this product is used with other wireless devices. In
this case, change the channel of other wireless devices.
(Multiple units of this product have an automatic channel
avoidance function.)
Operation becomes unstable when battery power is low. See
"Installing·Replacing the Battery" on the reverse of this sheet, and
replace the batteries as soon as possible.
The alkaline batteries supplied with this product are for
y
checking product operation. These batteries may discharge
and drain during storing and shipping.
* When not using the mouse, turn it off to save battery power.
It is possible that the standard Windows mouse driver did not
install correctly and that this product is detected as an unknown
device by Windows®. This product is usually detected as a USB
human interface device. If it is detected as an unknown device, see
"Removing an unknown device, " and after removing the device
from Device Manager, repeat "Step 2 - Installing the Receiver Unit"
on the front of this sheet.
If you have installed drivers and settings utilities produced by the
original manufacturer for a previous mouse, uninstall them first.
This product may not operate correctly if a driver made by another
company is installed. See the instruction manual that was supplied
with your previous mouse for uninstall instructions.
It is possible that the driver is conflicting with another driver
such as that for a laptop touch pad. To use this product
correctly, you must delete the touch pad driver. However, if you
delete this driver, you may not be able to use the touch pad or
touch pad functions. Contact the PC manufacturer for more
details.
The wheel moves, but the mouse cursor does not
„
In certain applications that do not support the scrolling
function, the mouse cursor will not move when you move the
wheel.
Removing an unknown device
If the standard Windows mouse driver did not install correctly and
this product is detected as an unknown device, remove the unknown
device from Device Manager, and then repeat "Step 2 - Installing the
Receiver Unit" on the front of this sheet.
y
If there are multiple unknown devices, before
removing a device, check that it is actually this
product. Disconnect the receiver unit and check
which unknown device disappears. The device that
disappears is this product.
If the unknown device does not disappear even after
y
you have deleted the driver following the instructions
below, it is possible that there is something wrong with
the PC. Contact the PC manufacturer.
With the receiver unit connected to the PC, follow the procedure below
to remove the unknown device.
* Be sure to log on using an administrator account when Windows starts
up.
* Screen display may differ depending on operating system, but
the procedure remains the same.
Display Device Manager.
Approximately
y
Windows® 7 and Windows Vista®
10 m
1. From the [Start] menu, right-click [Computer].
2. Click [Properties].
Receiver unit
3. Click [Device Manager].
y
Windows® XP
1. From the [Start] menu, right-click [My Computer].
2. Click [Properties].
3. Click the [Hardware] tab.
4. Click
.
The Device Manager window appears. Right-click the un-
known device, and click [Uninstall].
Click
.
Disconnect the receiver unit and
restart the PC.
Repeat the procedure from "Step 2 - Installing the Receiver
Unit" on the front of this sheet.
- 2 -
당해 무선설비는 운용 중 전파혼신 가능성이 있음 .
Basic specifications
이 기기는 가정용으로 전자파적합등록을 한 기기로서
주거지역에서는 물론 모든 지역에서 사용할 수 있습니다 .
Product name
Wireless Optical Mouse
Article No.
M-D23DR Series
OS
Windows 7 (up to SP1), Windows Vista (up to SP2),
Windows XP (SP2 to SP3)
Mac OS X (10.5 to 10.5.8, 10.6 to 10.6.7)
Resolution (dpi)
1000
Interface
USB
Radio frequency
2.4 GHz bandwidth
低功率電波輻射性電機管理辦法
Radio wave method
DS-SS modulation
第十二條
Radio wave outreach
Non-magnetic substance (e.g. wooden desk): Approx.
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不
10 m
得擅自變更頻率、加大功率或變更原設計之特性及功能。
Magnetic substance (e.g. metal desk): Approx. 3 m
第十四條
* Test values in the ELECOM environment
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；
Mouse body dimensions
54.2 (W) x 90.0 (D) x 32.4 (H) mm
經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
Receiver unit dimensions 15.0 (W) x 19.0 (D) x 6.5 (H) mm
前項合法通信，指依電信規定作業之無線電通信。
Operating temperature/
5 to 40°C, 90% RH max. (no condensation)
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設
humidity
備之干擾。
Storing temperature/
-10 to 60°C, 90% RH max. (no condensation)
humidity
Batteries
AA alkaline battery, AA manganese battery, AA nickel
hydride battery
Operating time
Measure of the operating time when an AA alkaline
battery is used
Continuous operating time: Approx. 166 hours
Continuous standby time: Approx. 277 days
Estimated serviceable time: Approx. 77 days
(when the PC is operated for eight hours a day
and 25% of the PC operation is assigned to mouse
operation)
ELECOM CO., LTD.
•
This manual is copyright of ELECOM Co., Ltd.
1-1 Fushimi-machi 4-Chome Chuoku, Osaka Japan 541-8765
•
Unauthorised copying and/or reproducing of all or part of this
manual is prohibited.
宜麗客 （上海） 貿易有限公司
•
The specifications and appearance of this product may be changed
上海市徐匯区肇嘉浜路1065甲号飛雕国際大厦704号
without prior notice for product improvement purposes.
電話 : 86-21-33680011
FAX : 86-21-64271706
•
ELECOM Co., Ltd. shall bear no responsibility for any and all affects
resulting from the use of this product regardless of the above
URL : http://www.elecom-china.com/
reasons.
ELECOM (SHANGHAI) TRADING CO. , LTD.
•
Export or service transaction permission under the Foreign
Rm 704 , Feidiao International Bldg , 1065 ZhaoJiaBang Rd , Shanghai ,
China 200030
Exchange and Foreign Trade Control Law is required in order to
export this product or parts of this product that constitute strategic
TEL : 86-21-33680011
FAX : 86-21-64271706
materials or services.
URL : http://www.elecom-china.com/
•
Windows and the Windows logo are trademarks of the Microsoft
group of companies.
Elecom Korea Co., Ltd.
•
Mac, Mac OS, and Macintosh are registered trademarks or
5F Suam Bldg. 1358-17, Seocho2-dong, Seocho-gu, Seoul 137-862,
Korea
trademarks of Apple Inc., in the United States
TEL : 1588-9514
•
Company names, product names, and other names in this manual
FAX : (02)3472-5533
are generally trademarks or registered trademarks.
URL : www.elecom.co.kr
B 급 기기 ( 가정용 정보통신기기 )
廢電池請回收
Wireless Optical Mouse
M-D23DR Series
User's Manual
1st edition, September 10, 2010
ELECOM Co., Ltd.
©2011 ELECOM Co., Ltd. All Rights Reserved.
Advertisement
