FRONT PANEL
From Top to Left:
RJ45 Ports
Fiber Ports
NOTE: The RJ45 data port has two LEDs located on each connector. The left LED indicates LINK status,
and the right LED indicates ACTIVITY.
LEDs: The table below describes the operating modes:
LED
LNK
ACT
Revision 050908
Auto Sensing 10/100 Base-TX Connections
100 Base-FX Connections (only on 708FX2 model)
LED lights when Power is supplied to the unit
Color
Description
GREEN
Power is ON
RED
Power is ON and a fault condition exists
OFF
Power is OFF
GREEN
10/100Mb Link between ports
OFF
No Link between ports
GREEN
Data is active between ports
OFF
Data is inactive between ports
Page 9 of 101