N-Tron 700 Series User Manual & Installation Manual page 23

Administration – System, Continued...
By selecting the Modify button, you will be able to change the switch's IP Address, Subnet Mask, Gateway,
Name, Contact information, and the Location of the switch through the web management features. It is
recommended to change the TCP/IP information through the Command Line Interface (CLI) initially, but it
defaults to the following:
IP Address – 192.168.1.201
Subnet Mask – 255.255.255.0
Gateway – 192.168.1.1
Revision 050908
Page 23 of 101