Reset The Switch; Show Or Clear The Last System Error; Show System Information - N-Tron 700 Series User Manual & Installation Manual

CLI Commands, Continued...

Reset the Switch

Command Name
Description
Syntax
Parameters
Example
Notes

Show or Clear the Last System Error

Command Name
Description
Syntax
Parameters
Example
Notes

Show System Information

Command Name
Description
Syntax
Parameters
Example
Notes
Revision 050908
reset
Reset (reboot) the switch
reset
None
N-TRON/Admin> reset
Performing Soft-Reset...
...
syserr
Show or clear the last system error
If clear is not supplied, then the last system error is displayed.
syserr [clear]
clear
Clear the last system error.
N-TRON/Admin> syserr
Last System Error: None.
N-TRON/Admin> syserr clear
Last System Error: Cleared.
sysinfo
Show system information
sysinfo
None
N-TRON/Admin> sysinfo
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+ N-Tron 700 Series
+
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+ Model: 708FX2
+ Boot Loader: BL 1.0.1.2 (0x01000102)
+ OS Version: 1.0.5
+ Build Date: Jan 29 2008 at 09:22:45 (0xFC100000)
+ Copyright: Copyright(c)2008 N-Tron Corp. All rights reserved.
+
+ Processor: 66 MHz (66000000)
+ Flash Size: 8 MB
+ SDRAM Size: 16 MB
+ MAC Address: 00:07:af:ff:b8:00
+ IP Address: 192.168.1.225
+ Subnet Mask: 255.255.255.0
+ Gateway: 192.168.1.1
+
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Page 85 of 101