Safety Notices - Xircom RealPort CardBus Ethernet 10/100 + Modem 56 User Manual

Safety Notices

This card is intended for use with UL 1950/EN60950/IEC950 (or other NRTL)
listed ITE computers that contain operator-accessible PC Card slots.
New Zealand Telepermit Compliance Notes
General
The grant of a Telepermit for any item of terminal equipment indicates only
that Telecom has accepted that the item complies with minimum conditions
for connection to its network. It indicates no endorsement of the product by
Telecom, nor does it provide any sort of warranty. Above all, it provides no
assurance that any item will work correctly in all respects with another item
of Telepermitted equipment of a different make or model, nor does it imply
that any product is compatible with all of Telecom's network services.
Important Notice
Under power failure conditions, this telephone may not operate. Please
ensure that a separate telephone, not dependent on local power, is
available for emergency use.
Some parameters required for compliance with Telecom's Telepermit
requirements are dependent on the equipment (PC) associated with this
device. The associated equipment shall be set to operate within the
following limits for compliance with Telecom's Specification:-
1 (a) There shall be no more than 10 call attempts to the same number
within any 30 minute period for any single manual call initiation, and
(b) The equipment shall go on-hook for a period of not less than 30
seconds between the end of one attempt and the beginning of the next
attempt.
2 Where automatic calls are made to different numbers, the equipment
shall go on-line for a period of not less than 5 seconds between the end
of one attempt and the beginning of the next attempt.
3 The equipment shall be set to ensure that calls are answered between 3
and 30 seconds of receipt of ringing.
A-17
Appendixes