Xircom RealPort CardBus Ethernet 10/100 + Modem 56 User Manual page 26

4-8
RealPort CardBus Ethernet 10/100+Modem 56 User's Guide
SOCKET (For 32-bit NDIS3 Driver CBE.SYS) identifies the
number of the host computer's PC slot or socket into which the
Xircom CardBus adapter is inserted. Valid parameters are
AutoDetect, 1, 2, 3, and 4. If a socket number is specified, only the
specified socket is checked for the Xircom adapter. Under
AutoDetect, the driver will automatically check all slots for the
Xircom CardBus adapter.
TXBUFFERSIZE sets the size of the adapter transmit packet
buffer. This is the number of transmit packets in decimal in the
range 1 - 10 for 16-bit drivers and 1 - 100 for the 32-bit ODI
driver. Each packet adds approximately 1520 bytes to the resident
size of the driver.
VERBOSE displays additional configuration information when the
driver loads, including information about the CardBus controller
on the PCI to CardBus bridge on the host computer.