Inserting A Pause; Using Recall (R Or Flash); Using Caller Id - Samsung SF-330 User Manual

Inserting a pause

With some private telephone systems, you must dial an access code (9, for example) and listen for a second dial
tone before dialling an outside number. In such cases, you need to insert a pause in the number when you are
registering Auto Dial such as a One-Touch or Speed Dial number.
If you are asked for the number when setting up Auto Dial, follow this procedure:
Press to insert a pause while entering the number.
Redial/Pause
• A 'P' is inserted at the point where you pressed
many times you want.

Using Recall (R or Flash)

The name of this button (
Recall
If you do not have a special service that uses the switch-hook signal, do not press
you could disconnect the line.
If you get a call and you want to transfer it to someone else, press
person. This may not work with some phone systems. Refer to your telephone's instruction manual for more
information. The recall is of "Time break" type.
1 Press when you are on the telephone.
Recall
2 Enter the phone number to transfer it to someone else.
• In UK, you may have some problems when you try to use BT services.
3
Hang up the handset when the person answers.

Using Caller ID

Many countries have the Caller ID system which enables the receiver to view the numbers or names of callers.
Once you have subscribed to Caller ID services, your machine can display caller information. To switch the
Caller ID feature on:
1 Press repeatedly until
Menu
2 Select
Caller ID
3 Choose the desired option, and press
• On : Activates the Caller ID feature.
•
On /w Junk Fax
junk fax numbers" on page 6.5.)
• : Deactivates the Caller ID feature.
Off
6.2
) differs depending on your country. The
SETUP SYSTEM
by pressing < or >, and press
Start/Enter
: Activates Caller ID and ignores any fax registered as a junk fax (see "Registering/deleting the
. If you need a longer pause, press
Redial/Pause
button is equivalent to R or Flash.
Recall
and dial the number of that other
Recall
appears, and press
Start/Enter
.
Start/Enter
.
Redial/Pause
during a call. If you do,
Recall
.
as