Speaker Settings - Panasonic SC-BT100 Operating Instructions Manual

Changing settings with the setup menu

Speaker settings

Speaker presence settings
(Center, surround and surround back speakers only)
Press [, , , ] to select the speaker icon and press [OK].
ms dB
L C R
0.0 0.0
Complete dB
SW
0.0
Test
dB ms dB
LS RS
0.0 0.0 0.0
dB ms dB
LB RB
0.0 0.0 0.0
Press [, ] to select the setting and press [OK].
Icon examples:
C
Center
LS
Surround
LB
Surround
a1
back
a1
Surround back speakers are set to "
a2
You can select " " only when surround speakers are set to "
e.g.,
5.1ch speaker connection
ms dB
L C R
0.0 0.0
Complete dB
SW
0.0
Test
dB ms dB
LS RS
0.0 0.0 0.0
dB ms dB
LB RB
0.0 0.0 0.0
Adjusting speaker level
(Effective when playing multi-channel audio)
Select "Test" and press [OK].
A test signal is output.
Front (L) (( Center (( Front (R) ((

Surround (LS) ( Surround back (LB)
While listening to the test signal, press [, ] to adjust the volume
of each speaker.
Center speaker: (T6 dB to U6 dB)
Surround and Surround back speakers: (T10 dB to U10 dB)
pSet each speaker level according to the volume of the Front (L)
and Front (R) speaker volume respectively.
Press [OK].
The test signal stops.
pNo signal is output for the subwoofer. To adjust its volume, see
page 26, Adjusting speaker level during play.
QT9129
w To finish the speaker setting
34
Press [, , , ] to select "Complete" and press [OK].
Center
Surround
a1
Surround back
Select when the center speaker is
connected and in use.
a2
Select when the center speaker is not
connected or not in use.
Select when the surround speakers are
connected and in use.
Select when the surround speakers are
not connected or not in use.
Select when
– using the optional Panasonic
wireless system SH-FX67 and
speaker system SB-HS100A to
enjoy 7.1ch surround sound.
– connecting an amplifier to the
SURROUND BACK terminal at the
back of the main unit to enjoy 7.1ch
surround sound.
Select when the surround back speakers
are not connected or not in use.
" by default.
7.1ch speaker connection
ms dB
L C R
0.0 0.0
Complete dB
SW
0.0
Test
dB ms dB
LS RS
0.0 0.0 0.0
dB ms dB
LB RB
0.0 0.0 0.0
Surround (RS)

( Surround back (RB)
Changing the delay time
(Effective when playing multi-channel audio)
(Center, surround and surround back speakers only)
For optimum listening with 7.1/5.1-channel sound, all the speakers,
except for the subwoofer, should be the same distance from the
seating position. If you have to place the center, surround and
surround back speakers closer to the seating position, adjust the delay
time to make up for the difference.
If either distance or
relevant table and change to the recommended setting.
5.1ch speaker connection
Approximate room dimensions
C
L C



LS RS
LS
Circle of constant primary listening distance
: Actual speaker position
: Ideal speaker position
: Primary listening distance
Press [, , , ] to select the delay time box and press [OK].
Press [, ] to select the setting and press [OK].
ms dB
L C R
0.0 0.0
dB
Complete
SW
0.0
Test
dB ms dB
LS RS
0.0 0.0 0.0
".
dB ms dB
LB RB
0.0 0.0 0.0
Center speaker
Difference
Approx. 34 cm (1 ft. 1 in.)
Approx. 68 cm (2 ft. 2 in.)
Approx. 102 cm (3 ft. 4 in.) 3.0 ms
Approx. 136 cm (4 ft. 5 in.) 4.0 ms
Approx. 170 cm (5 ft. 6 in.) 5.0 ms
ms
L
0.0
Complete
Test
Test
dB
LS
0.0
Surround
dB
(LS)
LB
0.0
is less than , find the difference in the
7.1ch speaker connection
C
C
R L


SW

LS
LS

LB RB
LB RB
RS
Center
Surround
Surround back
Surround/Surround back
speakers
Setting
1.0 ms Difference
2.0 ms Approx. 170 cm (5 ft. 6 in.) 5.0 ms
Approx. 340 cm (11 ft. 1 in.) 10.0 ms
Approx. 510 cm (16 ft. 8 in.) 15.0 ms
Center
dB
C R
0.0
dB
SW
0.0
Surround (RS)
ms dB
RS
0.0 0.0
ms dB
RB
0.0 0.0
Surround back (RB)
Surround back (LB)
R
SW
RS
RS
Setting