Advertisement
OWNER'S
MANUAL
ALWAYS READ
INSTRUCTIONS
BEFORE USING
TOOL
ALWAYS WEAR
SAFETY
GOGGLES
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
MODEL NO.
ATD-3737
SAVE THIS
MANUAL FOR
FUTURE REFERENCE
Heavy Duty Heat Gun Owner's Manual
FOR INDOOR USE ONLY. STORE INDOORS
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE HEAT GUN TO RAIN OR MOISTURE.
CONNECT TO GROUNDED OUTLET.
READ INSTRUCTION MANUAL BEFORE USING.
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
Lead from lead-based paints,
●
Crystalline silica from bricks and
●
cement and other masonry products, and
Arsenic and chromium from
●
chemically-treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in well ventilated area, and work with
approved safety equipment, such as those dust masks that
are specially designed to filter out microscopic particles.
ATD-3737
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ATD Tools ATD-3737
Summary of Contents for ATD Tools ATD-3737
- Page 1 ATD-3737 Heavy Duty Heat Gun Owner’s Manual FOR INDOOR USE ONLY. STORE INDOORS OWNER’S TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE HEAT GUN TO RAIN OR MOISTURE. MANUAL CONNECT TO GROUNDED OUTLET. READ INSTRUCTION MANUAL BEFORE USING.
-
Page 2: Warning! Important Safety Instructions
WARNING！IMPORTANT SAFETY INSTRUCTIONS ： WARNING Heat guns are a source of very high temperature flameless heat (up to 750°F/399°C). As with other products which generate extremely high temperatures, regardless of your specific application, sufficient care and caution should be observed when using this product to reduce the risk of fire, electrical shock or personal injury. -
Page 3: Operating Instructions
OPERATING INSTRUCTIONS Operating the Heat Gun Shrinking Packaging 01. Plug heat gun into properly rated outlet. After shrink wrap has been sealed around product, make 02. With the rocker switch in the “OFF” position, familiarize a small hole in it to allow trapped air to escape. Then yourself with handling the heat gun. -
Page 4: Cleaning And Care
This will secure the heating HEAVY DUTY HEAT GUN element in the nozzle assembly. MODEL NUMBER: ATD-3737 4. Align the holes of the heating assembly with the holes POWER SOURCE: 120V AC, 60Hz, 13.5A on the housing of the heat gun.
Need help?
Do you have a question about the ATD-3737 and is the answer not in the manual?
Questions and answers