Operating Instructions Washing Machine Imesa LM7EDP Dear Imesa customer! Welcome to the family of Imesa customers. We hope that you will have many years of use from your new machine. The machine has many special functions. To ensure that you get the most out of these functions, we recommend that you read the operating instructions before using the machine.
Contents Before using your machine for Settings the first time You can change the following Transport protection settings: Packing material Door opening Washer door Language Language selection Temperature Checking water hardness Child-safe Safety instructions Care and cleaning General Cleaning the trap and the drainage pump Installation Cleaning the detergent...
Before using your machine for the first time Transport protection Remove any transport protection devices before installing the machine. See the "Transport protection" chapter. Packing material Please sort waste materials in accordance with local guidelines. Washer door • The washer door cannot be opened until the machine is connected to the electricity supply.
Safety instructions General Transport/Winter storage • Read the operating instructions and keep them If the machine is to be transported or stored in in a safe place. unheated premises where the temperature can • Installation of water and electricity, if required, fall below freezing, do as follows: should be carried out by a qualified •...
Child safety Keep an eye on children! Child safety catch • Always close the washer door and start the Do as follows to open the settings menu: programme immediately after you have added 1. Turn off the machine using the main power detergent.
Description of the washing machine 1. Main power switch 2. Detergent compartment 3. Programme panel 4. Type plate (on the inside of the washer door) 5. Drainage pump cover 6. Drainage pump (behind hatch) 7. Washer door Detergent compartment 1. Pre-wash 2.
Advice and tips before washing Here are some tips that may help you before Coloured cotton washing. Coloured cotton items with the washing instruction Sorting your laundry 60°C should be washed at 60°C for the first time in order to remove any excess dye. If you do not Sort items according to: do so, there is a risk that the colour will run.
Page 8
Advice and tips before washing Note! Due to environmental concerns, we discourage the use of strong chemicals. When using agents for bleaching or stain removal, there is a risk of rust (corrosion) and discolouration of the machine.
Washing Sort your laundry. Note! See the "Advice and Tips before washing" Detergent overdosing does not give better section. washing results; it merely causes a greater impact on the environment. Place underwired bras in a laundry net. Try using less detergent, and increase only if Empty pockets.
Washing Select the programme Programme name Spin Start/Stop Temperature Time Door opening The display shows the programme name, the Super quick wash, 60°C water temperature and the spin speed. Fast programme for laundry that just needs The washing machine has a number of freshening up.
Washing Close the washer door and Once the program has finished press the Start/Stop button Once a programme has finished, "End" appears on the display. Time remaining The washer door opens automatically once the "Programme started" is shown on the display. programme has finished.
Settings You can change the following settings: • Language • Child-safe • Door opening • Temperature °C/°F Do as follows to open the settings menu: 1. Turn off the machine using the main power switch. 2. Press and hold the Door opening button and then press the main power switch. Then press the Door opening button 5 times within 10 seconds.
Care and cleaning Cleaning the trap and the drainage Cleaning the detergent pump compartment The washing machine has a trap where smaller Note! objects such as coins and hairpins can collect. Do not run the detergent compartment through To clean the trap and the drainage pump, do as a dishwasher! follows: 1.
Care and cleaning Cleaning the inside of the machine to avoid unpleasant smells Modern detergents often allow clothes to be washed at low temperatures. This means that small deposits can build up in the machine. These, in turn, may lead to unpleasant smells developing. To avoid this, we recommend running a 95°C wash programme once a month.
Care and cleaning Rinse holes under the agitator If you have hard water If you suspect that objects such as nails or paper If you live in an area with hard water (high clips may have fallen into the wash drum, you limescale content), a greyish-white coating may should check the space under the agitator.
Troubleshooting The washer door will not open If in the future the washer door does not open when the wash programme has finished, call the 1. Check that the main power switch is on. service division. 2. Is there power? Check your home’s fuses (circuit breakers).
Troubleshooting Error messages washer door. If this does not resolve the problem, call the service division. If an error occurs during the programme a message is shown on the display. To exit the Water inlet fault message after taking measures, turn the machine Check: off and then back on.
Transport protection Before the machine is used, the three transport Note! screws should be removed as shown below. If the machine is to be moved and transported, the transport screws must be refitted to prevent damage to the machine through shaking. If the transport screws or plastic plugs have been lost you can order new ones from your retailer.
Installation Positioning the washing machine The washing machine can be installed as a built-in or freestanding unit. Position the machine so that the electrical plug is easily accessible. A. Built-in The washing machine can be installed under a counter top with a working height of 850-900 mm. Leave a 5 mm space around the entire machine, including between the rear edge of the top cover and the wall behind it.
Installation Drainage connection Electrical installation The machine is supplied with a drainage hose The electrical connection must be made using a attached, which must be connected to a drain. cable for permanent installation, with a multipolar See the examples below. The height must be circuit breaker, by a qualified professional.
Service Before contacting the service Model designation division Before you contact the service division, make sure that you know the model designation, type designation and serial number. Type plate The model designation can be found on the panel. The type designation and serial number can be found on the type plate on the inside of the washer door.
Quick guide Washing fabric softener into the compartment on 1. Empty pockets and refasten zips. the right with the -symbol. 2. Read the item’s laundry label. 2. If you use liquid detergent, follow the 3. Sorting laundry. detergent manufacturer’s recommendations. Note! Select the programme Place underwired bras in a laundry net.
Need help?
Do you have a question about the LM7EDP and is the answer not in the manual?
Questions and answers