Page 1
Dear Imesa customer! Welcome to the family of Imesa customers. We hope that you will have many years of use from your new machine. The machine has many features. To make the most of its functions, we recommend that you read the operating instructions before using the machine.
CONTENTS SAFETY INSTRUCTIONS TROUBLESHOOTING Child safety The washer door will not open Installation Opening the door in an emergency Overfl ow guard function The machine will not start Transport/winter storage After power failure Packing material Wet washing still in the machine Recycling Error messages ADVICE AND TIPS BEFORE WASHING...
SAFETY INSTRUCTIONS GENERAL • This machine can be used by children aged 8 and upwards, and by peo- • Keep the operating instructions in a ple with reduced physical capacity, safe place. mental ability, memory loss or lacking • The machine should only be used for experience and knowledge.
SAFETY INSTRUCTIONS CHILD SAFETY • Children must be watched to ensure they do not play with the machine. • Always close the washer door and start the programme immediately after you have added detergent. • Do not allow small children to use or play with the washing machine.
SAFETY INSTRUCTIONS INSTALLATION RECYCLING • Conduct installation and connec- This washing machine is manufactured tion in accordance with the separate and labelled for recycling. In order to installation instructions. prevent injuries, the machine must be made unusable once the decision has •...
ADVICE AND TIPS BEFORE WASHING Here are some tips that may help you before washing. COLOURED COTTON Coloured cotton garments labelled with washing SORTING YOUR LAUNDRY instruction 60°C must be washed at 60 °C initially to remove any excess dye. Failure to observe this advice Sort items according to: could lead to the colour running.
USING YOUR WASHING MACHINE Start Programme selector Time remainin Stop Program Main power switch ADD DETERGENT AND FABRIC The quantity of detergent needed depends, amongst other things, on how hard the water is. See the detergent SOFTENER pack for details. Phone your local water company to check the water hardness in your area.
USING YOUR WASHING MACHINE Rinse NOTE! This programme performs one cold rinse cycle + spin. Do not fi ll above the compartment’s maximum fi ll level. Suitable for laundry that just needs to be dampened. Otherwise fabric softener will run in too early, which impairs the washing eff...
SETTINGS HOW TO CHOOSE THE SETTINGS WATER INTAKE (depending on the model) 1 Turn off the machine using the main power switch. 2 Press and hold the Stop button and then press the Connecting to both the hot and cold water supplies main power switch.
CARE AND CLEANING CLEANING THE TRAP AND THE CLEANING THE DETERGENT DRAINAGE PUMP COMPARTMENT The washing machine has a trap where smaller objects Pull out the detergent compartment using the release such as coins and hairpins can collect. To clean the trap button.
CARE AND CLEANING Do as follows: IF YOU HAVE HARD WATER 1 Insert a screwdriver or the like into the hole on the If you live in an area with hard water (high limescale agitator as illustrated and carefully pry to the left. content), a greyish-white coating may form on the washer drum.
TROUBLESHOOTING THE WASHER DOOR WILL NOT OPEN THE MACHINE WILL NOT START • Check that the main power switch is on. • Is the washer door properly closed? Push it fi rmly. The press the Start button. • Has the power supply been cut off ? Check the house fuses (circuit breakers).
TROUBLESHOOTING Water inlet fault ERROR MESSAGES Check: If an error occurs during the programme a message is shown on the display. To exit the message after taking • that the tap on the water pipe is open. measures, turn the machine off and then back on. •...
TECHNICAL INFORMATION INFORMATION FOR TEST INSTITUTE Energy labelling European test standard: EN 60456 Washing program: Standard cotton, 1200 rpm, 8 kg cotton Connection: Cold water 15 °C Test method for noise measurement: IEC-60704-2-4 TECHNICAL DATA Height: 850 mm Width: 595 mm Depth: 700 mm Weight:...
INSTALLATION POSITIONING THE WASHING MACHINE CONNECTION TO WATER SUPPLY The washing machine can be installed as a built-in or Water connection should be carried out by an freestanding unit. Place the machine on a fi rm surface appropriately qualifi ed person. Connect the machine with easy access to the plug.
INSTALLATION DRAINAGE CONNECTION ELECTRICAL INSTALLATION The machine is supplied with a drainage hose attached, If the machine is delivered from the factory with a plug which must be connected to a drain. See the examples attached it can be connected to an earthed wall socket. below.
BEFORE CONTACTING THE SERVICE DIVISION BEFORE CONTACTING THE SERVICE DIVISION Before you contact the service division, make sure that you know the model designation (1), type designation (2) and serial number (3). The model designation can be found on the panel. The type designation and serial number can be found on the type plate on the inside of the washer door.
PROGRAMME CHART Water consumption (approx. liter) 1) + 2) Cold Program Standard cotton 1200 1,45 3:10 Standard cotton 1200 0,80 3:00 Heavy wash 1200 2,80 2:00 Heavy wash 1200 1,70 1:35 White 1200 2,50 1:45 White / Colour 1200 1,55 1:20 White / Colour 1200...
Page 19
PROGRAMME CHART Adjustment of the displayed washing time Advanced technology allows the appliance to sense the amount of laundry and add the required amount of water during the washing process. Depending on the washing load, washing time can be longer or shorter and the time displayed will be adjusted accordingly.
CLOSE THE WASHER DOOR AND PRESS THE START BUTTON The time remaining is shown in hours and minutes. We reserve the right to make changes. WM80.C LM80PEDP IMS en (05-19)
Need help?
Do you have a question about the LM80PEDP and is the answer not in the manual?
Questions and answers