Page 1
Dear Imesa customer! Welcome to the family of Imesa customers. We hope that you will have many years of use from your new machine. The machine has many features. To make the most of its functions, we recommend that you read the operating instructions before using the machine.
CONTENTS SAFETY INSTRUCTIONS TROUBLESHOOTING Child safety The washer door will not open Installation Opening the door in an emergency Overflow guard function The machine will not start Transport/winter storage After power failure Packing material Wet washing still in the machine Recycling Error messages ADVICE AND TIPS BEFORE WASHING...
SAFETY INSTRUCTIONS GENERAL CHILD SAFETY • Keep the operating instructions in a safe place. • Children must be watched to ensure they do not play with the machine. • The machine should only be used for washing items as described in these instructions. It is not intended for •...
SAFETY INSTRUCTIONS INSTALLATION • Conduct installation and connection in accordance with the separate installation instructions. • Installation of water and electricity, if required, must be carried out by a qualified professional. • Remove any transport protection devices before using the machine, see the separate installation instructions. OVERFLOW GUARD FUNCTION If the water level in the machine rises above normal, the overflow guard function begins to pump water out...
ADVICE AND TIPS BEFORE WASHING WOOL Here are some tips that may help you before washing. These fabrics are labelled for either machine wash or SORTING YOUR LAUNDRY for hand wash. The machine’s Wool/hand wash, 30 °C programme is at least as gentle as washing by hand. Sort items according to: •...
USING YOUR WASHING MACHINE Start Programme selector Time remainin Stop Program Main power switch ADD DETERGENT AND FABRIC The quantity of detergent needed depends, amongst other things, on how hard the water is. See the detergent SOFTENER pack for details. Phone your local water company to check the water hardness in your area.
USING YOUR WASHING MACHINE Rinse NOTE! This programme performs one cold rinse cycle + spin. Do not fill above the compartment’s maximum fill level. Suitable for laundry that just needs to be dampened. Otherwise fabric softener will run in too early, which impairs the washing effect.
SETTINGS HOW TO CHOOSE THE SETTINGS 1 Turn off the machine using the main power switch. 2 Press and hold the Stop button and then press the main power switch. Then press the Stop button 5 times within 10 seconds. 3 Select the setting you want to change by turning the programme selector.
CARE AND CLEANING CLEANING THE DETERGENT Do as follows: COMPARTMENT 1 Insert a screwdriver or the like into the hole on the agitator as illustrated and carefully pry to the left. Pull out the detergent compartment using the release button. Rinse the compartment and scrub it clean.
TROUBLESHOOTING THE WASHER DOOR WILL NOT OPEN THE MACHINE WILL NOT START • Check that the main power switch is on. • Is the washer door properly closed? Push it firmly. The press the Start button. • Has the power supply been cut off? Check the house fuses (circuit breakers).
TROUBLESHOOTING ERROR MESSAGES If an error occurs during the programme a message is shown on the display. To exit the message after taking measures, turn the machine off and then back on. The error messages that may be shown in the display are: Close the Door Close the washer door and press Start to start the...
TECHNICAL INFORMATION INFORMATION FOR TEST INSTITUTE Energy labelling European test standard: EN 60456 Washing program: Standard cotton, 1400 rpm, 8 kg cotton Connection: Cold water 15 °C Test method for noise measurement: IEC-60704-2-4 TECHNICAL DATA Height: 850 mm Width: 595 mm Depth: 700 mm Weight:...
INSTALLATION POSITIONING THE WASHING MACHINE CONNECTION TO WATER SUPPLY The washing machine can be installed as a built-in or Water connection should be carried out by an freestanding unit. Place the machine on a firm surface appropriately qualified person. Connect the machine with easy access to the plug.
INSTALLATION DRAINAGE CONNECTION ELECTRICAL INSTALLATION A water outlet hose is included with the machine. This If the machine is delivered from the factory with a plug is attached to the machine’s outlet and routed to a floor attached it can be connected to an earthed wall socket. drain or drainage pipe.
BEFORE CONTACTING THE SERVICE DIVISION BEFORE CONTACTING THE SERVICE DIVISION Before you contact the service division, make sure that you know the model designation (1), type designation (2) and serial number (3). The model designation can be found on the panel. The type designation and serial number can be found on the type plate on the inside of the washer door.
PROGRAMME CHART Program Max. load Spin Speed Consumption values (kg) (rpm) Water Energy Programme time consumption consumption (approx. hrs and (approx. liter) (approx. kWh) min.) Standard cotton, 60 °C 1400 1.30 2:16 Standard cotton, 40 °C 1400 0.70 2:03 Heavy wash, 90 °C 1400 2.40 1:55...
CLOSE THE WASHER DOOR AND PRESS THE START BUTTON The time remaining is shown in hours and minutes. We reserve the right to make changes. WM80.C LM8PEDP IMS en (04-14)
Need help?
Do you have a question about the LM8PEDP and is the answer not in the manual?
Questions and answers