Cleaning The Catalytic Combustor - Travis Industries Small Flush Owner's Manual

Cleaning the Catalytic Combustor

NOTE: We strongly recommend using an ash vacuum with brush attachment to clean the catalytic
combustor. If you do not have one, you may use a brush to dislodge flyash.
1. With the stove fully cooled, insert the ash vacuum nozzle into the area directly above the door
opening.
2. Carefully place the brush surface of the nozzle over the catalytic combustor openings and remove
any ash or debris. Take care to prevent damage to the catalytic combustor (the surface is fragile).
© Travis Industries
Maintaining Your Appliance
100-01342
31
4131101