Using Handsfree Mode; Switching To Mute - Swisscom Aton CL112 User Manual

Have you ordered the calling line
display service from your network
provider?
¤ Check whether your provider supports
calling line display (CLIP) and that the
function has been activated for you. If
necessary, contact your provider.

Using handsfree mode

In handsfree mode, you activate the loud-
speaker so that you can hear the caller with-
out having to hold the handset to your ear.
You therefore have both hands free and
other people can listen in on the conversa-
tion.
Please note
Inform your caller before you use the
handsfree function so that the caller
knows a third party may be listening.
Activating/deactivating handsfree
mode
During a call and when listening to the
answering machine (Aton CLT112 only), acti-
vate or deactivate handsfree mode.
d
Press the handsfree key.
Each key press switches
between handset and hands-
free mode. If handsfree mode is
activated, the key is lit up.
If you wish to place the handset in the
charger during a call:
¤ Press and hold handsfree key d while
placing the handset in the base/charger
and for a further 2 seconds.
For instructions on adjusting the handsfree
volume, please see page 50.

Switching to mute

You can deactivate your handset's micro-
phone during a call.
v
Press right on the control key to
mute the handset. The display
shows Microphone is switched
off.
Press the key again to reactivate
the microphone.
Making calls
29