Traps - Intel Express 510T User Manual

C H A P T E R 3
Purpose
Adding a trap
Standard Configuration
9 Click OK .

Traps

A trap alerts you of events occurring in the switch. The traps list
shows where SNMP traps (generated by the switch) are sent. You
can:
Add a new entry to the list
•
Delete an entry
•
• Edit existing entries
Note If there are no entries in the Traps list, then no SNMP traps
are sent.
1 Select Device Setup or Stack Setup .
2 Click Traps .
3 Click Add .
4 Type the Destination IP address, or click This PC .
5 Type the community (SNMP password).
6
Click OK .
47