Pairing Your Headset
In order to use your Jarv Nmotion Bluetooth Stereo Earbuds with a
Bluetooth-enabled device, you will first need to pair the two.
1. Place the headset and the mobile phone where they are easily
viewable and no more than one meter apart.
2. Ensure that the headset is fully charged
3. Ensure that the headset is turned off (Very important)
4. Press the Pairing button (middle button with phone icon) for
5 seconds until the red and blue light flash alternately which
indicates that you are in Pairing Mode.
5. Activate your mobile phone's Bluetooth pairing function.
6. Set the mobile phone to search for Bluetooth devices within range
and select "Nmotion BTHL-201" from the list of devices shown.
7. If you are prompted for a Passcode enter "0000" and press "ok" to