Pairing Your Headset - Jarv Joggerz Pro Sports BT501 User Manual

Pairing Your Headset

In order to use your Jarv Joggerz Pro Bluetooth
headphones with a Bluetooth-enabled device, you will
first need to pair the two.
1. Place the headphones and the mobile phone where
they are easily viewable and no more than 3 ft. apart.
2. Ensure that the headphones are fully charged
3. Ensure that the headphones are turned o (Very
important)
4. Press and hold down the Multi-Function button for
approximately 9-10 seconds until the red and blue light
flashes alternately and an audible tone is heard through
the headphones which indicates that you are in Pairing
Mode. (Note: A blue light will turn on at first but keep
pressing down the pairing button until it changes to a
flashing blue/red light which indicates that you are in
pairing mode)