Understanding 410T Switches; Port Leds; Status Led; Crossover Button - Intel Express 410T Quick Start And User Manual

Understanding 410T Switches

18

Port LEDs

The LEDs above each port indicate port status, individual port speed, and
port activity.
Left LED
Port Activity
(Green/Orange)
LED Status
Left Solid green
Blinking green
Blinking orange
Off
Right Solid orange
Off

Status LED

LED Status
Status Orange
Green
Red*
*When the switch is first powered on, the Status LED will be red for a
couple of seconds before the diagnostic mode starts then turn orange.

Crossover Button

The Express 410T switches have a button that toggles port 1 from MDI-X to
MDI. This allows you to connect to another switch or a hub without using a
crossover cable. For more information, see pages 23-24.
MDI
MDI-X
5 6 7
Meaning
Device linked.
Receiving activity on that port.
A collision was detected on this segment.
No link detected.
Device connected at 10Mbps.
Device connected at 100Mbps.
Meaning
Switch is performing diagnostics.
Diagnostics have passed, the switch is ready.
Diagnostics have failed.
®
Intel Express 410T Standalo
MDI
1 2
MDI-X
Right LED
8
Port Speed
(Orange)
3 4