Understanding Ethernet Module Leds - Intel Express 10/100 Stackable Hub Ethernet Module User Manual

LED Status
Green Solid
Blinking
Off
Amber Steady blink and
green LED on solid
Blinking and
green LED off
Off

Understanding Ethernet Module LEDs

The LEDs on the Ethernet Module provide information about the
module's configuration and status.
Ethernet Module
Change Auto-negotiate Change
duplex speed
Full-duplex
Half-duplex
Port LEDs
The LEDs above a port on the Ethernet Module provide information
about the port's configuration and status.
Green LED
(left side)
Meaning
Port has a link.
Receive or transmit activity detected on port.
No link detected.
Ethernet Module speed and device speed don't
match. This occurs only if the speed of the Ethernet
Module has been forced to either 10 Mbps or
100 Mbps and the device on the other end doesn't
match.
The module has auto-partitioned the port due to a
temporary error condition on the network. Make
sure the duplex setting on the module matches the
attached device.
Normal. No link detected if green LED is unlit.
Get other manuals https://www.bkmanuals.com
or
Auto-negotiate
Coll
100 Mbps
10 Mbps
MDI MDI-X
Amber LED
(right side)
The LEDs on both
ports light when a
cable is attached
to either port.
9