Midi Reception Modes; Channel Reception Modes - Yamaha PortaTone PSR-510 Owner's Manual

MIDI
The [RECEIVE CH/CL/COM] button is used to specify the reception mode for each of the 16 MIDI channels,
the internal or external clock mode, and MIDI start/stop command reception mode.

Channel Reception Modes

The PSR-510 allows any of five reception modes to be individually assigned to MIDI channels 1 through 16.
The five modes are:
Mode "0" RX OFF: Reception disabled.
Mode "1" MULTI: Received MIDI note data directly controls the PSR-510 tone generator. Dif-
Mode "2" REMOTE: Received MIDI note data is handled in the same way as data from the
Mode "3" CHORD: Received MIDI note data is interpreted as Auto Accompaniment chord
Mode "4" ROOT: Received MIDI note data is interpreted as Auto Accompaniment bass note
Z
Press the [RECEIVE CH/CL/COM] Button & Select a Channel ...........................................................
Channel number
X
Select the Desired Mode ........................................................................................................................
Mode number
58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

MIDI Reception Modes

ferent voices can be played on different channels.
PSR-510's own keyboard.
commands.
commands.
NOTES
Press the [RECEIVE CH/CL/COM] button, then use the [+] and [–]
RECEIVE
CH/CL/
buttons, the number buttons, the data dial, or the [RECEIVE CH/CL/
COM
COM] button itself to select the MIDI channel (1 ... 16) for which you
want to specify a new reception mode. The channel number appears on the
MODE
................
right of the MULTI DISPLAY.
0 RX OFF
1 MULTI
2 REMOTE
3 CHORD
4 ROOT
NOTES
Use the [+/–] button in the number-button row to select the desired re-
ception mode for the selected channel. The modes are selected in sequence
+ –
each time the [+/–] button is pressed, and the mode number appears on the
1 _ _
9
left digit of the MULTI DISPLAY.
NOTES
• The send channel must correspond to the channel set for the modes
2-4.
• If the PSR-510 receives more than one note at the same time while
mode "4" (ROOT) is selected, the last note will be interpreted as the
Auto Accompaniment bass note.
• "cL" and "cd" will appear on the right of the display if you increment
above channel number 16 or below channel number 1. These selec-
tions are used for the Clock Mode and Start/Stop Mode functions
described below.
• The currently selected reception mode is retained in memory even
when the power switch is turned off, as long as batteries are installed
or an AC adaptor is connected.