Midi Bulk Dump - Yamaha PortaTone PSR-510 Owner's Manual

MIDI
MIDI bulk dump operations allow large amounts of MIDI data to be transmitted from one device to another.
The entire contents of the currently selected PSR-510 PAGE MEMORY (CUSTOM ACCOMP, MULTI PADS,
SONG MEMORY, REGISTRATION MEMORY) can be dumped to a second PSR-510 or to a bulk storage de-
vice such as a MIDI data recorder or MIDI computer.
Z
Make the Required MIDI Connections ..................................................................................................
Data Recorder
MIDI IN
MIDI OUT
PSR-510
X
Select a PAGE MEMORY .......................................................................................................................
PAGE
MEMORY
PAGE #
MIDI BULK
DUMP/
PAGE COPY
C
Press the [MIDI BULK DUMP/PAGE COPY] Button .............................................................................
PAGE
MEMORY
PAGE #
MIDI BULK
DUMP/
PAGE COPY
V
Press [YES] to Transmit ........................................................................................................................
ARE YOU SURE ?
56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

MIDI Bulk Dump

Connect the PSR-510 MIDI OUT terminal to the MIDI IN terminal of
the device which is to receive the bulk data.
NOTES
Select the PAGE MEMORY number you want to transmit (page 54).
Press the [MIDI BULK DUMP/PAGE COPY] button. The "ARE YOU
SURE?" indicator will flash and the PSR-510 will ask "Are you sure?". At
the same time "1dP", "2dP", "3dP", or "4dP" will appear on the MULTI
DISPLAY, depending on the selected PAGE MEMORY number.
Press the [YES] button to execute the bulk dump operation, or the [NO]
button to cancel and return to the VOICE SELECT mode.
YES NO
The [MIDI BULK DUMP/PAGE COPY] button indicator will light
during bulk dump transmission, and will go out when the transmission has
finished. The progress of the bulk dump transmission ([-A-]m[-S-]m[-n-]
m[-r-]) will also be indicated on the MULTI DISPLAY. When all the data
has been transmitted the PSR-510 will automatically return to the VOICE
SELECT mode.
NOTES
• You may also have to set up the receiving device to receive the bulk
data. Refer to the receiving device's operation manual for MIDI bulk
dump reception details.
• All of the PSR-510 panel controls are disabled during bulk dump
transmission.
• Each letter, appears in oder on the MULTI DISPLAY, indicates that
the following data is sent: [-A-] for Custom Accompaniment data, [-S-]
for Song Memory data, [-n-] for Multi Pad data, [-r-] for Registration
Memory data.