Selecting & Playing The Voices; Orchestration - Yamaha PortaTone PSR-510 Owner's Manual

Selecting & Playing the Voices
The PSR-510 has 128 stunning voices plus 8 different drum and percussion kits that
you can select and play in a number of ways.

Orchestration

The unique ORCHESTRATION button group in the PSR-510's VOICE control section lets you select and
play from one to four "parts" at the same time using a variety of "orchestrations". One of the PSR-510's 128
voices is assigned to each part.
Single: One voice over the entire keyboard.
Dual: Two voices simultaneously over the entire keyboard.
Split: Different voices with the left and right hands.
Split & Dual: Combinations of the Split and Dual modes.
There are actually a number of variations on
each of the above orchestrations. The ORCHES-
TRATION buttons are used to choose the type of
orchestration you want.
Left-hand voice 1
ORCHESTRATION
L1
L2
Left-hand voice 2
The four available parts are turned on and off by
the [R1], [R2], [L1], and [L2] buttons. The indica-
tors next to each of these buttons tell you which
parts are on and which are off, and therefore indi-
cate the current orchestration mode. The [EDIT]
button determines which of the four orchestration
parts is to be edited. You can, for example, assign
any of the PSR-510's 128 voices to each of the or-
chestration parts. But before we discuss voice as-
signment and editing, let's take a look at the various
orchestration modes:
10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Right-hand voice 1
(or single voice)
R1
EDIT
R2
Right-hand voice 2
(or single voice)
VOICE
VOICE
SELECT
VOL OCTAVE DSP PAN
DEPTH
KEYBOARD ONE TOUCH
PERCUSSION SETTING
Single Modes
In the "single" modes either the [R1] or [R2] part
voice can be played over the entire keyboard. The R1
and R2 single-voice modes are selected simply by
pressing either the [R1] or [R2] button if neither the
[L1] or [L2] indicators are lit. If the [L1] and/or [L2]
indicators are lit, press them so that both indicators
go out.
Note that when you select the [R1] or [R2] single-
voice mode, the triangular EDIT indicator for the se-
lected voice also lights. This means you can select a
different voice number or otherwise edit the current
voice using the procedures described on page 12.
L1 R1
EDIT
The R1 voice is played across the
L 2 R 2
entire keyboard.
L1 R1
EDIT
The R2 voice is played across the
L 2 R 2
entire keyboard.
ORCHESTRATION HARMONY EFFECT
TYPE TYPE
L1 R1
EDIT
L2 R2
HARMONY EFFECT