Yamaha PortaTone PSR-510 Owner's Manual page 52

Record Functions
Example
MULTI DISPLAY
(Beat/Clock)
MULTI DISPLAY
(Step Size)
MULTI DISPLAY
(Gate Time)
Note
Press
[PLAY/STOP]
B
Repeat .....................................................................................................................................................
N
Stop Recording .......................................................................................................................................
50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
The following chart shows the step size and gate time settings required
to enter a variety of notes:
Hold
PLAY/STOP
STEP
FWD
Twice
It's also possible to specify the step sizes for all notes by specifying the
shortest required step size and then using the [STEP FWD] button to enter
all other note lengths.
NOTES
Repeat steps 2, 3, and 4 until the required number of notes has been en-
tered.
• Previously-recorded tracks can not be monitored during step record-
NOTES
Stop recording by pressing the track or MULTI PAD button being re-
corded. The [STEP REC] indicator will go out.
• PSR-510 allows you to "punch-in" and "punch-out" at any measure to
NOTES
• "---" may appear on the MULTI DISPLAY while the PSR-510 is
Hold
PLAY/STOP PLAY/STOP
STEP STEP
FWD FWD
Once Twice
• In the case shown to the left, press and hold , press
[STEP FWD] and then
ing.
step re-record Song Memory data. Step recording is carried out in 1-
measure units, so if you punch out in the middle of measure rests will
be recorded for the remainder of that measure.
processing step-recorded data.
Hold
PLAY/STOP
STEP
FWD
Three
times
, and then release .