Miele KM 362 Operating Instructions Manual page 23

Cleaning and care
Re-assemble the wok-burner as
follows:
Please ensure that all locating tabs and
notches are aligned correctly to enable
correct positioning of components.
^ Position the burner head r to the
burner base u, so that the ignition
safety device s and the ignitor t fit
through the holes of the burner head.
If the burner head is correctly
positioned, it does not move about.
^ Position the burner ring q over the
burner head r.
^ Position the outer burner cover p
onto the burner head r ensuring that
all locating tabs are in the correct
position.
^ Finally, position the inner burner
cover o into position.
Important: Please ensure that the
components are placed in the correct
order after cleaning is complete.
1. Do not mix up the top and bottom.
2. The locating lugs must fit exactly
into the notches.
23