Music - Cisco UC320W Administration Manual

Telephony

Music

Music
Cisco Unified Communications UC320W Administration Guide
Configuration > Telephony > Music
Use the
to enable music for held calls and parked calls. Also set the extension that can be
dialed to listen to the music.
Note: Refer to the on-screen illustration for the location of the LINE IN port, where
you can connect an external music source. You can position your mouse pointer
over the pointer icon to view the picture at a larger size.
• Internal: Use the internal music server for any music feature that is enabled.
A standard music file is stored on the device for this purpose.
• External: Use an external music server for any music feature that is
enabled. You can connect a music player to the LINE IN port for this
purpose. If you select this option but a music source is not detected, the
system will fail over to the internal music source.
• Play music for calls on hold: Check this box to play music for calls that are
placed on hold. Uncheck the box to disable this feature.
• Play music for parked calls: Check the box to play music for calls that are
parked using the Call Park feature. Uncheck the box to disable this feature.
• Play music over External Paging: Check the box to enable an external
music source to be played over an external speaker. This feature requires
having an external music source connected to the Line In port of the Cisco
UC320W, and an external speaker connected to the Line Out port.
• Extension to listen to music: Keep the default number or enter an
extension number that users can dial from an IP phone to listen to the music.
Extension numbers must be unique and must comply with the rules entered
on the Internal Dialing page. An error message appears if you enter an
invalid or duplicate extension number. Tip: A quick way to enter a valid
extension number is to click the phone icon next to the extension number
field.
page to choose the music source and
3
33