Steam Ironing; Shot Of Steam - Russell Hobbs Iron Instructions Manual

14 Put the plug into a power socket (switch the socket on).
15 The light will come on.
16 Turn the temperature control to bring the setting you want next
to the 5 mark.
17 When the iron reaches the temperature you set, the light will go
off. It'll then cycle on and off as the thermostat operates to
maintain the temperature.
C REDUcING TEMPERATURE
18 This takes a bit longer, as the iron has to lose the heat it has built
up, so be patient. It's best to organise your ironing so that you
don't need to reduce the temperature.
C STEAM IRONING
19 Set the temperature control to S or above, otherwise you'll get
water on your clothes, not steam.
20 Set the steam control to the level you want, S = no steam, # =
high steam.
21 Wait till the light goes out, then start ironing.
* SPRAy
, Water spotting affects some fabrics. Test this on a hidden part of
the fabric.
22 This works with dry or steam ironing, as long as there's water in
the reservoir.
23 Check that there's water in the reservoir.
24 Lift the iron off the fabric.
25 Aim the spray nozzle at the fabric.
26 Press the * button – you may have to press it 2 or 3 times to
pump water through the system.
S ShOT OF STEAM
27 This works with dry or steam ironing, as long as there's water in
the reservoir, and the temperature is above S.
28 Check that there's water in the reservoir.
29 Check that the temperature control is at S or higher.
30 Lift the iron off the fabric, then press the ~ button
5