Maintenance - Makita BSR730 Instruction Manual

Cordless circular saw

Hide thumbs Also See for BSR730:

Available languages

Enlarged version

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and the bat-

tery cartridge is removed before carrying out any work on

the tool.

Replacement of carbon brushes (Fig. 24 & 25)

Replace carbon brushes when they are worn down to the

limit mark. Both identical carbon brushes should be

replaced at the same time.

To maintain product safety and reliability, repairs, mainte-

nance or adjustment should be carried out by a Makita

Authorized Service Center.

ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita service center.

• Carbide-tipped saw blade 190 mm

• Rip fence (Guide rule)

• Hex wrench

• Dust nozzle

• Hose 28 mm in inner dia. (1.5 m or 3.0 m long)

• Various type of Makita genuine batteries and chargers

Table of Contents