Makita BSS610 Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Power Tool
  5. Makstar BSS610
  6. Instruction manual

Makita BSS610 Instruction Manual

Hide thumbs Also See for BSS610:

Advertisement

Table of Contents

See also: Instruction Manual
Cordless Circular Saw
MODEL BSS610
006699
I N S T R U C T I O N
M A N U A L
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Advertisement

Table of Contents
loading

Related Manuals for Makita BSS610

Summary of Contents for Makita BSS610

  • Page 1 Cordless Circular Saw MODEL BSS610 006699 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    The tool is intended for performing lengthways and crossways straight cuts and mitre cuts with angles in wood while in firm contact with the workpiece. Director MAKITA INTERNATIONAL EUROPE LTD. Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, ENGLAND Responsible manufacturer: Makita Corporation Anjo Aichi Japan...

  • Page 3: General Safety Rules

    GENERAL SAFETY RULES GEA002-3 WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.

  • Page 4: Specific Safety Rules

    19. Store idle power tools out of the reach of chil- type of battery pack may create a risk of fire when dren and do not allow persons unfamiliar with used with another battery pack. the power tool or these instructions to operate 25.
  • Page 5 Hold power tool by insulated gripping surfaces or kickback from the workpiece as the saw is when performing an operation where the cutting restarted. tool may contact hidden wiring or its own cord. • Support large panels to minimise the risk of Contact with a “live”...
  • Page 6 • Use extra caution when making a “plunge saw to walk backwards, cutting whatever is in its cut” into existing walls or other blind areas. path. Be aware of the time it takes for the blade to The protruding blade may cut objects that can stop after switch is released.

  • Page 7: Important Safety Instructions

    17. Never attempt to saw with the circular saw held 18. Some material contains chemicals which may upside down in a vise. This is extremely danger- be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety ous and can lead to serious accidents.

  • Page 8: Functional Description

    FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 006700 • Always switch off the tool before insertion or removal of the battery cartridge.
  • Page 9 NEVER use the tool if it runs when you simply pull the switch trigger without pressing the lock-off lever. Return tool a MAKITA service center for proper repairs BAFORE further usage. • NEVER tape down or defeat purpose and function of lock-off lever.
  • Page 10 • Use only the Makita wrench to install or remove the blade. To remove the blade, press the shaft lock so that the blade cannot revolve and use the wrench to loosen the hex bolt clockwise. Then remove the hex bolt, outer flange and blade.

  • Page 11: Operation

    Connecting a vacuum cleaner 006711 When you wish to perform clean cutting operation, connect a Makita vacuum cleaner to your tool. Install the dust nozzle on the tool using the screw. Then connect a hose of the vacuum cleaner to the dust nozzle as shown in the fig- ure.

  • Page 12: Maintenance

    Rip fence (Guide rule) 006710 The handy rip fence allows you to do extra-accurate straight cuts. Simply slide the rip fence up snugly against the side of the workpiece and secure it in posi- tion with the screw on the front of the base. It also makes repeated cuts of uni- form width possible.
  • Page 13 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
  • Page 14 Memo...
  • Page 15 Memo...
  • Page 16 Makita Corporation Anjo, Aichi, Japan 884641A224...

This manual is also suitable for:

Bss611

Table of Contents