Table of Contents
Advertisement
®
Intel
IXDP465 Development Platform—Quick Start Guide
5. Verify the board booted properly by checking the LCD display
• for RedBoot bootloader:
line 1 = RedBoot
line 2 = 0001
• for VxWorks bootloader: see
Figure 7.
LCD Display for Wind River* VxWorks* Bootloader
11.0
Operating the Platform
The software release notes are intended to guide the user through software installation and setup of
the host computer, and can be found at the following Web site:
http://www.intel.com/design/network/products/npfamily/ixp425swr1.htm
Note:
You must register and login to download Intel software.
In the "Software Available" section of the above Web site, first click Register/Login, then select the
latest current software release; for example, "Intel
the release notes; for example, "2.0 Release Notes".
Developers should continue by following the instructions in the software release notes.
Refer to the Intel
the IXDP465 development platform, including how to update the IXDP465 development
platform's flash memory.
12.0
Technical Support
If any of the contents are missing or if you have any questions, contact your local Intel
representative.
May 2005
22
Figure
®
IXDP465 Development Platform User's Guide for detailed instructions on using
®
Intel
IXDP465 Development Platform
Order Number: 305825, Revision: 002
7.
®
IXP400 Software v2.0". Then click the link for
AN
Advertisement
Table of Contents
