Summary of Contents for Billy Goat TERMITE TKD502H
Page 1
ZIPPERLESS QUICK BAG ZIPPERLESS QUICK BAG ZIPPERLESS QUICK BAG P/N 890309 P/N 890309 P/N 890309 P/N 890309 P/N 890309 For non dusty TKD502H, TKD502ICQ conditions that are damaging to zippers. Specifications Specifications 3 3 3 3 3 Specifications Specifications Specifications...
Page 2
I N I N I N I N I N THE INTEREST OF SAFETY THE INTEREST OF SAFETY THE INTEREST OF SAFETY THE INTEREST OF SAFETY THE INTEREST OF SAFETY 5 5 5 5 5 BEFORE ST BEFORE ST BEFORE ST BEFORE ST BEFORE STA R A RTING ENGINE,...
4. INSTALL tamper (item 85) in chipper hopper (see page 7). 5. CONNECT spark plug wire. Your Billy Goat is shipped from the factory in one carton, completely assembled except for the upper handle, debris bag, and bag quick disconnect.
LITERATURE ASSY P/N 890163 13 13 13 13 CONTROLS 12 12 12 12 Throttle Owner's Literature Checklist Manual Control Check Owner's Clamp Cable 1" Manual 900813 Qty. 2 890252 Literature Check Literature Briggs Parts Bag STOP engines have Parts Bag SLOW a primer 890253...
Operation 16 16 16 16 INTENDED USE: This machine is designed for vacuuming Nozzle Height Fine Adjustment For Hard Surface leaves, grass clippings and other types of organic litter and Use: Optimum nozzle height is 1/2" (12.7mm) above ground with for chipping brush, limbs, corn and sunflower stalks and engine not running.
OPERATION 16 16 16 16 continued FOLDING HANDLE 1 6 . 1 6 . 1 6 .11 11 11 1 6 . 1 6 . By removing the debris bag, quick disconnect and leaving the bag support tray in place, the operator’s handle can be folded down to save space when transporting or storing unit (see fig 4).
Note: The chipper blade gap is factory set and should be checked BEFORE SERVICING UNIT. each time impeller is removed from engine crankshaft and reset if required. If reassembly requires a different quantity of shim washers, Billy Goat shim washer must be used. ® ENGINE: See engine manufacturer operator's instructions.
PARTS DRAWING 18 18 18 18 TKD502H, TKD502H, TKD502ICQ TKD502H, TKD502ICQ TKD502ICQ TKD502ICQ TKD502H, TKD502H, TKD502ICQ Part No. 890252 Form No. F021795B Page 10 of 12...
Page 11
TKD502H TKD502ICQ PARTS Item 19 19 19 19 Description LIST Part No. Part No. DUST BAG TURF (Service) (Rental 900798) (incl. (2) of 4,5,&11) 890806 890806 * Denotes THROTTLE ASSEMBLY (INCL. 1 ea items 4, 10) 810135 810135 standard WASHER - FLAT FENDER (11/32 x 1-1/4 x 0.05)
22 22 22 22 Contact your nearest engine manufacturer's autho- Please fill in the WARRANTY CARD and send the upper part to Billy Goat. The WARRANTY terms are stated on the lower part which remains with the rized servicing dealer.