Billy Goat KD510 Operator Owner's Manual

The powerful kd or tkd termite vacuum chipper

Hide thumbs Also See for KD510:

Operator owner's manual (6 pages)

Table Of Contents

Table of Contents

Quick Links

OPTIONAL ACCESSORIES

2 2 2 2 2

SHREDDER KIT

P/N 890209.

Shreds

leaves, dramatically reducing

total volume.

HOSE KITS

For vacuuming in hard to

reach areas.

Heavy Duty Vacuum

Hose Kit P/N 900943.

x 10'

(102mm)

(3.05m)

Homeowners Vacuum

Hose Kit P/N 900942.

x 10'

(102mm)

(3.05m)

NOZZLE WEAR PLATES

P/N 890413.

Extends

(STD. ON KD510HS)

nozzle life when used along

curbs and hard surfaces.

STANDARD TURF QUICK

DEBRIS BAG

P/N 890307.

(STD. ON TKD)

For use in leaves and grass in non-

dusty conditions.

OPTIONAL DEBRIS BAGS

QUICK DEBRIS BAG

P/N 890305 (STD. ON KD)

For use in dusty conditions.

DEBRIS BAG COVER

P/N 900801

Directs dust

downward away from operator.

ZIPPERLESS QUICK BAG

P/N 890309

For non dusty

conditions that are damaging

to zippers.

CASTER KIT

P/N 890412

For use on hard

surface

3 3 3 3 3

ENGINE:H.P.

ENGINE:TYPE

ENGINE:FUEL CAP.

ENGINE:OIL CAP.

W EIGHT:UNIT

W EIGHT:SHIPPING

ENGINE WEIGHT:

UNIT SIZE:

Part No. 890394

1 1 1 1 1

Operator Owner's Manual

KD510

KD510IC

5.0 (3.73kW)

B&S

B&S I/C

1.5qt. (1.4L)

0.63qt. (0.6L)

103# (46.7 kg)

126# (57.2 kg)

24.8# (11.05 kg)

OVERALL LENGTH: 62"(1.57m) OVERALL WIDTH 26.75" (0.68m)

T h a n k Yo u f o r S e l e c t i n g

The Powerful KD or TKD TERMITE

VACUUM CHIPPER

KD510, KD510IC, KD510H, KD510HS

TKD510IC, TKD510H

Specifications

KD510H

5.5 (4.1kW )

HONDA OHV

1.2qt. (1.1L)

0.63qt. (0.6L)

112# (50.8 kg)

122# (55.3 kg)

135# (61.2 kg)

145# (65.8 kg)

36# (16.3 kg)

Page 1 of 12

KD510HS

TKD510IC

5.0 (3.73kW)

B&S I/C

1.5qt. (1.4L)

0.63qt. (0.6L)

121# (57.2 kg)

126# (57.2 kg)

24.8# (11.05 kg)

OVERALL HEIGHT 42" (1.07m)

Form No. F011398B

TKD510H

5.5 (4.1kW )

HONDA OHV

1.2qt. (1.1L)

0.63qt. (0.6L)

130# (59.0 kg)

153# (69.4 kg)

36# (16.3 kg)

Table of Contents

Need help?

Do you have a question about the KD510 and is the answer not in the manual?

Questions and answers

Summary of Contents for Billy Goat KD510

Page 1: Specifications
1 1 1 1 1 T h a n k Yo u f o r S e l e c t i n g The Powerful KD or TKD TERMITE VACUUM CHIPPER Operator Owner's Manual KD510, KD510IC, KD510H, KD510HS TKD510IC, TKD510H Specifications KD510IC KD510H 5.0 (3.73kW)
Page 2: Table Of Contents
IN THE INTEREST OF SAFETY 5 5 5 5 5 BEFORE STARTING ENGINE, READ AND UNDERSTAND THE “ENTIRE OPERATOR'S MANUAL & EN- GINE MANUAL.” THIS SYMBOL MEANS WARNING OR CAUTION. DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE MAY OCCUR UNLESS INSTRUCTIONS ARE FOLLOWED CAREFULLY. WARNING: to the State of California to cause cancer, birth defects or other reproductive harm.
Page 3: General Safety
Read all safety and operating instructions before assembling or starting this unit. PUT OIL IN ENGINE BEFORE STARTING Your Billy Goat is shipped from the factory in one carton, completely assembled except for the upper handle, debris bag, and bag quick disconnect.
Page 4: Engine Labels
Label Do Not Fill While Away Engine Is Hot Item 29 Part Item 63 Part No.400268 No.400424 Label Danger Chipper For Wood Only Item 48 Part No. 890152 (TKD MODELS ONLY) DANGER Label Ear Eye Breathing Label Danger Flying Material Item No.
Page 5: Operation
(see fig 2.). When feeding forked branches, squeeze forks together and feed into chipper entrance (DO NOT overload). If forks are too large, use a pair of loppers to trim forks down to size. A lopper...
Page 6 OPERATION 16 16 16 16 continued Note: Dry wood is (fig. 2) harder to chip than green wood. (SP model shown) MULCH 1 6 . 1 6 . 1 6 . 1 6 . 1 6 .9 9 9 9 9 Wood chips made from branches in your own yard make excellent mulch.
Page 7 1 6 . 12 12 Before turning machine off, use the Tamper to slowly push remaining pieces of wood through the chipper. This can prevent any remaining wood from jamming in the chipper when machine is turned off. Do not leave tamper on the ground, store tamper in the chipper hopper.
Page 8: Maintenance
If gap is more than 0.080"(2.03mm), remove one or more shim washers as needed to obtain correct gap (see fig. 6 & fig. 7). The chipper will function at up to a maximum of 0.125"(3.18mm) gap. Page 8 of 12 Chipper blade is sharp.
Page 9: Maintenance Schedule
17.1 17.1 17.1 18. If chipper blade properly clears anvil surface, proceed to step . If not, return to (step 14) and add or subtract shim washers as needed to obtain a correct gap. 19. Reinstall engine and impeller onto housing in reverse order of removal.
Page 10: Parts Drawing & List
PARTS DRAWING 18 18 18 18 KD510H, KD510HS, KD510, KD510IC, TKD510IC, TKD510H Part No. 890394 Page 10 of 12 Form No. F011398B...
Page 11 PIN - HAIR COTTER ROD SHORT HEIGHT ADJUSTMENT BOLT - CARRIAGE 5/16 - 18 x 4 1/2 NUT LOCK 5/16 - 18 HEX HANDLE LOWER KD510 PLATE HANDLE SUPPORT LABEL DANGER CUT FINGER WASHER FLAT CUT 5/16 HUBCAP 1/2 WASHER WHEEL ASS’Y (incl.
Page 12: Troubleshooting
22 22 22 22 Please fill in the WARRANTY CARD and send the upper part to Billy Goat. The WARRANTY terms are stated on the lower part which remains with the user. Whenever a Billy Goat Machine is faulty due to a defect in material...

This manual is also suitable for:

Kd510ic Kd510h Kd510hs Tkd510ic Tkd510h

Billy Goat KD510 Operator Owner's Manual

Quick Links

Specifications

Need help?

Questions and answers

Related Manuals for Billy Goat KD510

Summary of Contents for Billy Goat KD510

This manual is also suitable for:

Table of Contents