PC D
I S P L AY
Adjusting the Screen Quality
T
he purpose of the picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by fine tuning alone, then do the frequency adjustments to
the utmost and fine tune again. After the noise has been reduced, re-adjust the picture
so that it is aligned on the center of screen.
Some OSD can be different depending on the model.
1-1
(LN-R269D/ LN-R329D)
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select "Setup",
then press the ENTER
button.
Press the UP/DOWN
buttons to select "PC", then
press the ENTER
button.
1-2
(LN-R409D / LN-R469D)
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select "Setup",
then press the ENTER
button.
Press the UP/DOWN
buttons to select "PC", then
press the ENTER
button.
2
Press the ENTER
button to select
"Image Lock".
71
English-
Change to the PC mode first.